308LT1 Flux Core Wire for Stainless Steel
Quantity: 10
FOR 18%CR-8%NI STAINLESS STEEL
- LOW SPATTER
- BEAUTIFUL BEADS
- SMOOTH SURFACE
- AWS A 5.22 : E308LT1-1/4
- JIS Z 3323 : TS308L-FB1
Welding 18%Cr-8%Ni stainless steel
(AISI 301, 302, 304, 305, 308)
YAWATA 308LT1 is a flux cored arc welding wire to be used with CO2 or AR+20% CO2 shield gas for welding 18%Cr-8%Ni stainless steel.
It provides excellent weldability and crack resistance due to proper ferrite contents in the deposted metal. Good penetration, stable arc, and x-ray quality welds.
SOFT ARC
TYPICAL CHEMICAL COMPOSITION OF DEPOSITED METAL (%) | |||||||
Shield Gas | C | Si | Mn | P | S | Cr | Ni |
CO2 | 0.03 | 0.43 | 1.19 | 0.026 | 0.003 | 18.86 | 9.29 |
AR+20%CO2 | 0.03 | 0.52 | 1.38 | 0.026 | 0.003 | 19.37 | 9.13 |
TYPICAL MECHANICAL PROPERTIES OF DEPOSITED METAL | ||
Shield Gas | TENSILE STRENGTH N/mm² (kgf/mm²) | ELONGATION % |
CO2 | 560 (57) | 40 |
SIZES & RECOMMENDED CURRENT RANGE (DC ±) | ||||
DIAMETER (mm) | 1.2 | 1.6 | ||
WELDING POSITION | Amp | Volt | Amp | Volt |
F, H-fil | 100-300 | 20-36 | 200-360 | 26-40 |
V, OH | 100-300 | 20-36 | - | - |
Inquiry - 308LT1 Flux Core Wire for Stainless Steel